Powersoft OTTOCANALI 12K4 DSP + DANTE – Combo United Services – renginių techninis aptarnavimas
Tilžės g. 41, LT-47182 Kaunas, Lithuania

Powersoft OTTOCANALI 12K4 DSP + DANTE


Šis powersoft ottocanali 12K4 yra lankstus ir patikimas 8 kanalų stiprintuvas, kuris gali išgauti 12000W galingumą prie 4 omų.

Neturime

    General
    Number of channels 8
     
    Output power Single channel mode Distributed line* Bridge mode
    2 Ω 4 Ω 8 Ω   70V 100V 4 Ω 8 Ω 16 Ω  
    1100 W 1500 W 850 W   1500 W 1500 W 2200W 3000W 1700 W  
    Max output voltage / current 150 Vpeak / 54 Apeak 100 Vpeak 140 Vpeak 300 Vpeak
     
    AC Main Power
    Power supply Reduntant, universal, regulated switch mode with PFC
    Nominal power requirement 100-240 V ±10%, 50-60 Hz
    Operating voltage 90 V – 264 V
    Power consuption** 115 V 230 V
    Idle 47 W 0.75 A 50 W 0.7 A
    1/8 of max output power @ 4 Ω 2075 W 18.5 A 2115 W 9.7 A
    1/4 of max output power @ 4 Ω 4150 W 36 A 4230 W 18.6 A
     
    Thermal
    Operating temperature range 0° – 45° C | 32° – 113° F
    Thermal dissipation** 115 V 230 V
    Idle 160 BTU/h 40.3 kcal/h 170 BTU/h 42.8 kcal/h
    1/8 of max output power @ 4 Ω 2141 BTU/h 539.5 kcal/h 1937 BTU/h 488.1 kcal/h
    1/4 of max output power @ 4 Ω 4283 BTU/h 1,079.3 kcal/h 3874 BTU/h 976.2 kcal/h
     
    AUDIO
    Gain 32 dB
    Input sensitivity 1.94 V / 8 dBu
    Max input level 6 V / 17.8 dBu
    Frequency response 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω
    S/N ratio > 109 dB (20 Hz – 20 kHz, A weighted)
    Crosstalk separation > 70 dB @ 1kHz (4 Ω)
    THD+N < 0.08% from 0.1 W to full power (typically <0.05%)
    IMD < 0.8% from 1 W to full power (typically <0.05%)
    Input impedance 10 kΩ balanced
    Slew rate 50 V/μs @ 8Ω, input filter bypassed
    Damping factor > 10000 @ 100 Hz (Lo-Z)
     
    Front panel
    Indicators and Controllers 8 x LED bar – Signal level and over-temperature protection
    8 x Knob – Level attenuator (continuous)
    1 x Push-button – Toggle PWS OUT
    4 x DIP switch – Toggle energy save on/off per channel pair
    Connectors
    AC main 1 x IEC C20 connector – 20 A max (region-specific power cord provided)
    Audio signal input 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Signal input – MAIN
    1 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Signal input – AUX
    Alarm 2 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Alarm connector
    Remote command 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 – Remote line/aux switch and PWS out
    1 x 4 pin Phoenix MC 1.5/4-ST-3.81 – Remote on/off switch and aux voltage
    Loudspeakers 2 x 8 pin Phoenix DFK-PC 4/8-G-7.62 – Signal output
     
    Rear panel
    Indicators and Controllers 8 x DIP switch – Toggle lo/hi impedance connection
    8 x DIP switch – Toggle 70V/100V distributed line nominal voltage
    8 x DIP switch – Toggle High Pass Filter
    8 x DIP switch – Toggle 35Hz/70Hz HPF cutting frequency
    1 x Power switch – 
     
    Construction
    Dimensions (L x H x W) 483 mm x 89 mm x 360 mm (19.0 in x 3.5 in x 14.2 in)
    Weight 14 kg (30.9 lb)

    Palikite komentarą

    El. pašto adresas nebus skelbiamas.