LD Systems AMP 205
- Professional mini amplifier
- 2 x 50W Class-D amplifier with low impedance outputs
- Small form factor 1/3 19″ rack, 1U
- Silent operation with passive cooling
- Connect to third party control for remote standby and volume control
- External 100-240V power supply
- Mounting plates for flexible inconspicuous installation, even above suspended ceilings
- Auto standby to save power
- Balanced line input and loudspeaker output on terminal strips
- User-friendly front panel with signal, clip and protection LEDs
- Optional rack tray for combining with other TICA® series products
Teirautis telefonu
+37069873838
darius@combo.lt
- Aprašymas
- Atsiliepimai (0)
Aprašymas
| Feature | Specification |
|---|---|
| Product Type | Installation Power Amplifier |
| Line Inputs | 2 |
| Line Input Connectors | Pitch 3.81 mm terminal block (3-pin), 2 balanced line inputs |
| Line Outputs | 0 |
| Powered Outputs | 2 with output mode selector (stereo / parallel / high power mode) |
| Cooling | Convection |
| Priority Levels | 1 |
| Nominal Input Sensitivity | 14 dBu / 2 dBu (Gain +12dB switch) |
| Nominal Input Clipping | 18 dBu (sine 1kHz, gain 0dB) |
| Input Connector | 2 x 3.81mm Terminal Block 3-pin |
| Standby Wake Up Threshold | 2.5 seconds |
| Output Type | Class D |
| Output Modes | Parallel, High Power Mode (ST/ HPM), Stereo |
| Amplifier Outputs | 2-channel (ST, PAR) / 1-channel (HPM) |
| Connector | 4-pin terminal block (pitch 5.08mm) |
| RMS Power (W) | 2 x 50 W @ 4 ohm (ST), 1 x 100 W @ 2 ohm (Continuous sine wave 1 kHz 10 sec) |
| Power (Peak) (W) | 1 x 110W @ 2ohm (Continuous sine wave 1kHz 10sec, 4 ohm load), 2 x 55 W @ 4ohm (ST, PAR) |
| Minimum Load Impedance | 4 Ohm (ST), 2 Ohms (HPM) |
| Frequency Range | 15 Hz – 20 kHz (-0.5 dB) |
| Protection Circuits | DC, Short circuit, Over-current, Undervoltage, Thermal overload |
| Power Supply Type | External SMPS |
| Operating Voltage | 100 V AC – 240 V AC, 50 – 60 Hz |
| Fuse | 0 |
| Secondary Voltage | 24 V DC |
| Secondary Current | 3.5 A |
| Secondary Connector | Terminal block 5.08 mm 2-pole |
| Primary Connector | IEC |
| Safety Class | 1 |
| Max. Power Consumption | 105 W (sine 1kHz with 4 ohm load) |
| Idle Power Consumption | 2 W (no signal input) |
| Standby Power Consumption | < 1 W |
| Operating Temperature (Non-Condensing) | 0°C – 40°C; < 85% humidity |
| Time to Auto-Standby | 20 Min. |
| Dimensions (W x H x D) (Height with Rubber Feet) | 142 mm x 53 mm x 222 mm |
| Accessories (Included) | External Power Supply, Mounting plates for surface mount applications, Terminal blocks for electrical connections |
| Weight | 1 kg |
Atsiliepimai
Atsiliepimų dar nėra.