| Output Power 1kHz (THD+N=1%: 4Ω) |
140W x 8 |
| Output Power 1kHz (THD+N=1%: 8Ω) |
140W x 8 |
| Output Power 1kHz (THD+N=1%: 4Ω / Double Power Mode) |
280W x 4 |
| Output Power 1kHz (THD+N=1%: 8Ω / Double Power Mode) |
280W x 4 |
| High Impedance: 100V Line |
125W x 8 / 80 Ω |
| High Impedance: 70V Line |
125W x 8 / 40 Ω |
| Voltage Gain RL=8Ω |
28.7dB |
| Voltage Gain RL=8Ω / Double Power Mode |
31.7dB |
| Voltage Gain 100V |
38.2dB |
| Voltage Gain 70V |
35.2dB |
| Power Consumption 1/8 Power (4Ω Pink Noise) |
250W |
| Power Consumption Idle (4Ω) |
73W |
| Power Consumption Standby |
23W |
| Total Harmonic Distortion |
≤ 0.2% (1kHz, half power) |
| Frequency Response |
0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz) |
| S/N Ratio |
≥ 100dB (A-weighted) |
| Crosstalk |
≤ -60dB |
| Input Sensitivity |
+4dBu |
| Input Impedance |
20kΩ (balanced), 10kΩ (unbalanced) |
| I/O Connectors |
Analog I/O: Euroblock x 2 (6P, balanced) |
| Digital I/O |
RJ45 x 2 (Dante PRIMARY / SECONDARY) |
| Speaker Output |
Barrier strip x 8 pairs |
| Control Ports |
Remote, Fault Output: Euroblock (3P) x 1 |
| Network |
Shared with Dante ports |
| Others |
AC Inlet x 1 |
| Input Level (Maximum) |
+24dBu |
| Protection Circuit |
Load protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting |
| Amplifier Protection |
Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) |
| Power Supply Protection |
Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C), Integrated power: Gain reduction (Restored automatically) |
| Cooling |
3-Speed fan x 2, front-to-back airflow |
| Power Requirements |
100V, 120V, 230V-240V; 50Hz/60Hz |
| Dimensions (W x H x D) |
480mm (18.9″) x 88mm (3.5″) x 422mm (16.6″) |
| Net Weight |
10.1kg (22.3lbs) |
Atsiliepimai
Atsiliepimų dar nėra.