LD Systems AMP 106 T

  • Professional mini amplifier
  • 60W Class-D amplifier with Lo-Z / Hi-Z selector switch between 4 Ohm / 100V / 70V outputs
  • Small format 1/4 19″ rack, 1U
  • Silent operation with passive cooling
  • Third-party connectivity for remote standby and volume control
  • External 100 – 200V power supply
  • Mounting plates for flexible inconspicuous installation, even above suspended ceilings
  • Auto standby to save power
  • Balanced line input and loudspeaker output with terminal strips
  • User-friendly front panel with signal, clip and protection LEDs
  • Optional rack tray for combining with other TICA® series products

Teirautis telefonu

+37069873838

darius@combo.lt

Availability: Išankstinis užsakymas Categories , , Tags ,

Aprašymas

Feature Specification
Product Type Installation Power Amplifier
Line Inputs 2
Music Sources 2 balanced stereo line inputs
Line Outputs 0
Powered Outputs 1 with output mode selector (Low-Z/High-Z)
Cooling Convection
Priority Levels 1
Nominal Input Sensitivity 8.5 dBu (Sine 1 kHz, Gain max)
Nominal Input Clipping 18 dBu (Sine 1kHz, Gain 0dB)
Input Connector 2 x 3.81mm Terminal Block 3-pin
Standby Wake Up Threshold – 30 dBu
Amplifier Output Type Class D
Amplifier Outputs Low-Z: 4 ohm minimum load, High-Z: 70V or 100V outputs
Connector 4-pin terminal block (pitch 5.08mm)
RMS Power (W) 60 W (Continuous sine wave 1kHz, 4 ohm load)
Power (Peak) (W) 72 W (100 msec sine 1kHz Burst @ 4 ohm load)
Frequency Range 20 Hz – 20 kHz (HI-Z, -1 dB), 15 Hz – 20 kHz (LO-Z, -1 dB)
High Pass Filter 110 Hz
Protection Circuits DC protection, over-current, thermal overload, Undervoltage, Short circuit, DC
Power Supply Type External SMPS
Operating Voltage 100 V AC – 240 V AC, 50 – 60 Hz
Secondary Connector Terminal Block 5.08mm 2-pole
Primary Connector IEC
Idle Power Consumption 2 W (no signal input)
Standby Power Consumption < 1 W
Operating Temperature (Non-Condensing) 0°C – 40°C; < 85% humidity, non-condensing
Time to Auto-Standby 20 Min.
Dimensions (W x H x D) (Height with Rubber Feet) 142 mm x 53 mm x 222 mm
Accessories Rack mounting hardware
Weight 1.3 kg

Atsiliepimai

Atsiliepimų dar nėra.


Būkite pirmas aprašęs “LD Systems AMP 106 T”