Yamaha DHR Series DHR15M
- The coaxial driver delivers precise, smooth phase and frequency response characteristics ideal for use in monitoring applications
- Featuring a plywood cabinet that delivers a clear sound with minimal vibration
- Compact, low profile, plywood enclosure with a polyurea coating for a robust, scratch-resistant surface
- A pole socket for use on a stand
- Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion
Teirautis telefonu
+37069873838
darius@combo.lt
- Aprašymas
- Atsiliepimai (0)
Aprašymas
| DHR15M | |
|---|---|
| Speaker type | 2-way, Bi-amped Powered Speaker, Bass-reflex |
| Frequency range (-10dB) | 50 Hz – 20 kHz |
| Coverage area | H65° × V75° |
| Crossover | 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) |
| Maximum Output Level (Measured peak, IEC noise@1m) | 131 dB SPL |
| Components | LF: 15″ cone, 3″ voice coil, ferrite magnet HF: 1.75″ diaphragm, 1″ throat compression driver, coaxial, ferrite magnet |
| Amplifier class | Class-D |
| Power rating | Dynamic: 1,000 W (LF: 800 W, HF: 200 W) Continuous: 465 W (LF: 400 W, HF: 65 W) |
| Cooling | Fan cooling, 4 speeds |
| Power consumption | 74 W (1/8 power), 18 W (idle) |
| Power requirements | 100 V – 100-120 V, 220-240 V, 110/127/220V (Brazil), 50/60 Hz |
| A/D D/A Converters | 24 bit 48 kHz Sampling |
| Processors | OFF, 100 Hz, 120 Hz, 24 dB/Oct; D-CONTOUR: FOR MAIN, MONITOR, OFF |
| I/O connectors | INPUT1: Combo x1 INPUT2: Combo x1 + RCA pin x2 (Unbalanced) OUTPUT: XLR3-32 x1 (CH1 Parallel Through or CH1+CH2 Mix) |
| Cabinet material | Plywood |
| Finish | Durable Polyurea Painting, Black |
| Handle | Side x1 |
| Pole socket | Ø35 mm x1 (Side) |
| Rigging | – |
| Floor Monitor Angle | 57° |
| Dimensions (W × H × D) | 642 mm (25.3″) × 369 mm (14.5″) × 505 mm (19.9″) |
| Net weight | 23.0 kg (50.7 lbs) |
| Options | – |
Atsiliepimai
Atsiliepimų dar nėra.