Aprašymas

Two 200W Channels In a 2U Power Amp

The XH200 is a two-channel high-output power amp that can be switched between 70V and 100V line operation (200W x 2 channels into 24ohms-70V / 48ohms-100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that the XH200 is significantly smaller and lighter than comparable amplifiers: it fits comfortably in a 2U rack space and weighs only 10 kg.

Monitor/Remote and Other Important Functions

A rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and a comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions.

Euroblock Input/Output Connectors, and Barrier Strip Output Connectors

Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 Hz or 80 Hz roll-off provide an extra margin of system flexibility.

General specifications		XH200
Total harmonic distortion		Less than 0.1% (40Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion		Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response		+0dB, -0.5dB (HPF=40Hz, 80Hz~20kHz)
S/N ratio		More than 103dB (DIN AUDIO)
Hum & noise level	Residual output noise	Less than -65dBu
Crosstalk		Less than -60dB
Voltage gain		38dB (100V), 35dB (70V)
Input sensitivity		+4dBu
Maximum input voltage		+22dBu
I/O Connectors	Line input / output ports	2x Euroblock
	Speaker output ports	2x Barrier strip
	Control ports	D-sub 15pin
Processors		HPF (40Hz/ 80Hz, 12dB/oct)
Protection circuit	Load protection	Power switch on/off mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%)
	Amplifier protection	Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 16ohms)
	Power supply protection	Thermal (Amplifier shuts down automatically, Operation not restored automatically; heatsink temp ≥ 90°C)
Amplifier class		EEEngine
Cooling		Variable-speed fan
Power requirements		Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption	Music source equivalent	400W
	Idling	40W
	Stand-by	5W
Dimensions	W	480mm; 18-7/8in
	H	88mm; 3-7/16in (2U)
	D	412mm; 16-1/4in
Net weight		9.8kg; 21.6lbs
Accessories		Owner’s manual, AC power cable, Security cover, 4x 3-pin Euroblock connector