LD Systems OXID 12 A

0.00


12″ powered PA Speaker with DSP

SKU: 1081 Kategorijos: ,

Aprašymas

The LD Systems Oxid 12A is an active 12″ full-range speakerfor compact PAs, monitoring applications, and installations with a 90° x 45° dispersion angle and a total output power of 1400 watts Peak.

Three selectable DSP presets optimize the frequency response of the OXID12A for various spheres of application: linear frequency response for normal operation or audio curve corrected response for low volumes or as a floor monitor. Reliable functioning is ensured by protection circuits against overcurrent and short-circuiting and a digital limiter; a switchable ground lift eliminates possible ground loop hum.

The OXID12A is loaded with a 12″ neodymium woofer and a 1″ ceramic HF driver that are driven separately by a high-efficiency Class D power amplifier with a switchable power supply and a Class AB power amplifier. The frequency response ranges from 50Hz – 20 kHz; the maximum sound-level pressure reaches 128 dB. The input is a combo socket (6.3 mm Jack / XLR) that is switchable to line or microphone level.

The asymmetrical cabinet with a monitor angle is made of rugged polypropylene; two handles simplify transport. There is a built-in speaker pole mount with a locking screw for speaker stands and six recessed M10 threads for flying points.

  • type: active
  • design: DSP controlled
  • low/mid driver dimensions: 12 “
  • low/mid driver dimensions (mm): 305 mm
  • low/mid driver magnet: Neodymium
  • low/mid driver brand: Custom made
  • low/mid driver voice coil: 2,5 “
  • low/mid driver voice coil: 63,5 mm
  • tweeter dimensions: 1″
  • tweeter dimensions (mm): 25,4 mm
  • tweeter magnet: Ceramic
  • tweeter brand: Custom made
  • tweeter voice coil: 1,75″
  • tweeter voice coil (mm): 44.4 mm
  • amplifier: Class D / Class AB
  • dispersion (H x V): 90 x 45°
  • Power (RMS): 350 W
  • Power (Peak): 1400 W
  • frequency response: 50 – 20000 Hz
  • crossover frequency: 1.6 kHz
  • max. SPL (continuous): 122 dB
  • max. SPL (peak): 128 dB
  • integrated media player: no
  • protection circuits: DSP based limiter, over-current, short circuit
  • controls: On/ Off, volume, DSP presets, ground lift, input switch: mic / line
  • display: Power, Signal, Limit
  • line inputs: 1
  • line input connectors: XLR
  • line outputs: 1
  • line output connectors: XLR
  • power supply: switch mode power supply
  • operating voltage: 110 – 120 V ~ 50/60 Hz or 220 – 240 V ~ 50/60 Hz, switchable
  • cabinet material: PP
  • cabinet construction: Bassreflex
  • monitor angle: 45°
  • width: 396 mm
  • height: 664 mm
  • depth: 372 mm
  • features: two handles, 36mm flange, 6 x M10 flying points, monitor angle, switchable DSP presets (monitor, flat, loudness), switchable ground lift

Papildoma informacija

Height

Stiprinimas

Atsiliepimai

Atsiliepimų dar nėra.


Būkite pirmas aprašęs “LD Systems OXID 12 A”