Aprašymas

The LD Systems Oxid 15A is an active 15″ full-range speakerwith digital signal processing and a total output power of 1400 watts Peak for compact PAs, monitoring, and installations.

Three selectable DSP presets optimize the frequency response of the OXID15A for various spheres of application: linear frequency response for normal operation or audio curve corrected response for low volumes or as a floor monitor. Reliable functioning is ensured by protection circuits against overcurrent and short-circuiting and a digital limiter; a switchable ground lift eliminates possible ground loop hum.

The OXID15A is loaded with a 15″ neodymium woofer and a 1″ HF driver with a ceramic magnet and a horn with a 90° x 45° dispersion angle. They are driven separately by a high-efficiency Class D power amplifier with a switchable power supply and aClass AB power amplifier. The frequency response ranges from48Hz – 20 kHz; the maximum sound-level pressure reaches 130 dB. The input is a combo socket (6.3 mm Jack / XLR) and switchable to line or microphone level; an XLR socket is used to loop through the signal.

The light, asymmetrical bass-reflex cabinet with a 45° monitor angle is made of rugged polypropylene; two handles ensure convenient transport. There is a built-in speaker pole mount with a locking screw for speaker stands and six recessed M10 threads for flying points.

type: active
design: DSP controlled
low/mid driver dimensions: 15 “
low/mid driver dimensions (mm): 381 mm
low/mid driver magnet: Neodymium
low/mid driver brand: Custom made
low/mid driver voice coil: 2,5 “
low/mid driver voice coil: 63,5 mm
tweeter dimensions: 1″
tweeter dimensions (mm): 25,4 mm
tweeter magnet: Ceramic
tweeter brand: Custom made
tweeter voice coil: 1,75″
tweeter voice coil (mm): 44.4 mm
amplifier: Class D / Class AB
dispersion (H x V): 90 x 45°
Power (RMS): 350 W
Power (Peak): 1400 W
frequency response: 48 – 20000 Hz
crossover frequency: 1.5 kHz
max. SPL (continuous): 124 dB
max. SPL (peak): 130 dB
integrated media player: no
protection circuits: DSP based limiter, over-current, short circuit
controls: On/ Off, volume, DSP presets, ground lift, input switch: mic / line
display: Power, Signal, Limit
line inputs: 1
line input connectors: XLR
line outputs: 1
line output connectors: XLR
power supply: switch mode power supply
operating voltage: 110 – 120 V ~ 50/60 Hz or 220 – 240 V ~ 50/60 Hz, switchable
cabinet material: PP
cabinet construction: Bassreflex
monitor angle: 45°
width: 396 mm
height: 664 mm
depth: 400 mm
features: two handles, 36mm flange, 6 x M10 flying points, monitor angle, switchable DSP presets (monitor, flat, loudness), switchable ground lift