Yamaha VXC3F


3.5″ full-range ceiling loudspeaker

colors: black or white


SKU: 142 Kategorijos: ,


  • 3.5” full-range speaker unit
  • Engineered for optimum BGM reproduction
  • Direct support for low-impedance or high-impedance connections
  • Low-profile design facilitates installation in limited ceiling spaces
  • Built-in carrying band increases safety during installation
  • Anti-drop tab mechanism provide secure temporary positioning during installation
  • Double-threaded speaker clamp screws for speedy tightening
  • Paintable grilles with magnetic catches
  • Black and white versions available
  • 2.5kg (5.5lbs), Ø285 x D112 mm (Ø11-1/4″ x D4-7/1

Hi-Z or Lo-Z

Both high-impedance and low-impedance connections are supported, and speaker wattage can be easily switched even after installation.

Low Profile

Reduced physical depth allows installation in ceilings where space is limited.


Reduced weight increases installation flexibility while lessening the burden on installation personnel.


A built-in “carrying band” not only makes the speaker easy to carry around, but also increases safety when working on a stepladder.


An anti-drop tab mechanism securely holds the speaker in place so that the installation can proceed safely and efficiently. There’s also a release lever that allows the speaker to be smoothly removed from the ceiling as required.


Double threaded screws used for the speaker clamp mechanism allow the clamps to be tightened twice as fast as conventional screws.


The supplied speaker grilles are firmly and elegantly held in place by powerful magnets. An anti-drop wire is also included.


The supplied grilles can be painted any color to match interior decor.

 VXS/VXC Series Painting Guide

General specifications VXC3F / VXC3FW
Speaker type Full range, Bass reflex
Frequency range (-10dB) 71 Hz – 20 kHz (Half-space:2π)
Nominal coverage 140° conical (Half-space :2π)
Components LF-HF 3.5” Full range unit
Power rating NOISE 20 W
PGM 40 W
Nominal impedance 8 Ω
Transformer taps 100V 15W, 7.5 W, 3.8 W
70V 15 W, 7.5 W, 3.8 W, 1.9 W
SPL Sensitivity (1W; 1m on axis) 87 dB SPL (Half-space:2π)
Peak (Calculated) 106 dB SPL (1m, Calculated based on power rating and sensitivity, exclusive of power compression)
I/O connectors Euroblock (4 pin) × 1 (input: +/-, loop-thru: +/-)
Protection circuit Load protection Full-range power limiting to protect network and transducers
Finish VXC3F: Black (approx. Munsell N3), VXC3FW: White (approx. Munsell 9.3)
Dimensions Diameter 285 (11-1/4″)
D 112 mm (4-7/16″)
Net weight 2.5 kg (5.5 lbs)
Cutout size Ø247 mm (Ø9-3/4″)
Required ceiling board thickness 5 mm – 37 mm
Accessories O-ring, Tile Rail, Cutout Template, Euro Block (4pin), Terminal Cover
Packaging Packaged in pairs
Certificate UL1480, NFPA70, CE, EAC, RoHS
EN54-24 compliance
Others Conduit tube: Ø15.4 mm – Ø21.3 mm

Papildoma informacija




Atsiliepimų dar nėra.

Būkite pirmas aprašęs “Yamaha VXC3F”