Aprašymas

Features	Applications
High power 130 dB continuous, 136 dB peak Fitted with integral handles Line array emission wavefront DSP onboard with dedicated presets Ultra fast setup and dismantling system Analog and digital AES-EBU inputs	Theatrical sound reinforcement Concert halls AV Systems Cinema and special effects

All the systems feature two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KK102		Acoustics
Power handling		400 W
Impedence		8 Ohm – 32 Ohm (Selectable)
Frequency range		150 Hz – 20 KHz.
Maximum SPL		124 dB continuous – 130 dB peak

		Coverage
Horizontal		110 °
Vertical		7° – 35° (Selectable)

		Crossover
Type		External Crossover required
Frequency		High pass @150 Hz, 24 dB/oct suggested minimum

		Transducers
Full-range		16×2″ Neodymium magnet with 0.75″ voice coil

		Audio Input
Connectors		2 x 4-pin Speakon
Wiring		1+1- (signal IN & LINK); 2+2- (through)

		Selection Switch
Vertical pattern		Spot – Flood
Impedence		8 Ohm – 32 Ohm (Selectable)

		Physical
Dimensions		8.1 x 100 x 5.9 cm (3.19″ x 39.4″ x 2.32″)
Weight		4.6 Kg (10.14 lbs)

KMT18		Acoustics
Power handling		800 W
Frequency range		30 Hz – 150 Hz. +/- 3dB (preset dependent)
Maximum SPL		130 dB continuous – 136 dB peak

		Coverage
Horizontal		Omni
Vertical		Omni

		Crossover
Type		DSP controlled
Frequency		150 Hz minimum (preset dependent)

		Transducers
Full-range		1 x 18″ Neodymium speakers with 3″ voice coil

		Amplifier
Type		1 module class D – DSP controlled
Power		2 x 1000 Watt @ 8 Ohm
Protection		Dynamic limiter, over current, over temp and short circuits

		Physical
Dimensions		46.5 x 47.5 x 61 cm (18.31″ x 18.70″ x 24.02″)
Weight		27.6 Kg (60.85 lbs)