Aprašymas

Features	Applications
High power 128 dB continuous, 134 dB peak Fitted with integral handles Line array emission wavefront DSP onboard with dedicated presets Ultra fast setup and dismantling system Analog and digital AES-EBU inputs	Theatrical sound reinforcement Concert halls AV Systems Cinema and special effects

Two channels of class D amplification. Input for a balanced line signal, a balanced microphone signal with phantom power AES/EBU protocol, XLR for ease of cabling.
All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KK102	Acoustics
Power handling		400 W
Impedence		8 Ohm – 32 Ohm (Selectable)
Frequency range		150 Hz – 20 KHz.
Maximum SPL		124 dB continuous – 130 dB peak

		Coverage
Horizontal		110 °
Vertical		7° – 35° (Selectable)

		Crossover
Type		External Crossover required
Frequency		High pass @150 Hz, 24 dB/oct suggested minimum

		Transducers
Full-range		16 x 2″ Neodymium magnet with 0.75″ voice coil

		Audio Input
Connectors		2 x 4-pin Speakon
Wiring		1+1- (signal IN & LINK); 2+2- (through)

		Selection Switch
Vertical pattern		Spot – Flood
Impedence		8 Ohm – 32 Ohm (Selectable)

		Physical
Dimensions		8.1 x 100 x 5.9 cm (3.19″ x 39.4″ x 2.32″)
Weight		4.6 Kg (10.14 lbs)

KMT12
Acoustics
Power handling		700 W
Frequency range		40 Hz – 150 Hz. +/- 3dB (preset dependent)
Maximum SPL		128 dB continuous – 134 dB peak

		Coverage
Horizontal		Omni
Vertical		Omni

		Crossover
Type		DSP controlled
Frequency		150 Hz minimum (preset dependent)

		Transducers
Full-range		1 x 12″ Neodymium speakers with 3″ voice coil

		Amplifier
Type		1 module class D – DSP controlled
Power		2 x 1000 Watt @8 Ohm
Protection		Dynamic limiter, over current, over temp and short circuits

		Physical
Dimensions		32.5 x 33.5 x 43.5 cm (12.91″ x 13.19″ x 17.13″)
Weight		12.6 Kg (27.78 lbs)