Aprašymas

Features	Applications
High power 135 dB continuous, 142 dB peak Fitted with integral handles Line array emission wavefront DSP onboard with dedicated presets Ultra-fast setup and dismantling system Analog and digital AES-EBU inputs	Theatrical sound reinforcement Concert halls AV systems Cinema and special effects

All the systems feature two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol also on an XLR for ease of cabling.
All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KY102		Acoustics
Power handling		1200 W
Impedence		8 Ohm– 32 Ohm (Selectable)
Frequency range		90 Hz – 20 KHz. (- 3dB)
Maximum SPL		132 dB continuous – 138 dB peak

		Coverage
Horizontal		90 °
Vertical		7° – 30° (Selectable)

		Crossover
Type		External Crossover required
Frequency		High pass @90 Hz, 24 dB/oct suggested minimum

		Transducers
Full-range		8 x 4″ Neodymium magnet with 1.5″ voice coil

		Audio Input
Connectors		2 x 4-pin Speakon
Wiring		1+1- (signal IN & LINK); 2+2- (through)

		Selection Switch
Vertical pattern		Spot – Flood
Impedence		8 Ohm – 32 Ohm (Selectable)

		Physical
Dimensions		11.3 x 100 x 13.2 cm (4.45″ x 39.4″ x 5.2″)
Weight		14.5 Kg (28.45 lbs)

KMT218		Acoustics
Power handling		1600 W
Frequency range		30 Hz – 150 Hz. +/- 3dB (preset dependent)
Maximum SPL		134 dB continuous – 140 dB peak

		Coverage
Horizontal		Omni
Vertical		Omni

		Crossover
Type		DSP controlled
Frequency		150 Hz minimum (preset dependent)

		Transducers
Full-range		2 x 18″ Neodymium speakers with 3″ voice coil

		Amplifier
Type		1 module class D – DSP controlled
Power		2 x 2500 Watt @4 Ohm
Protection		Dynamic limiter, over current, over temp and short circuits

		Physical
Dimensions		95.3 x 48 x 60 cm (37.52″ x 19.9″ x 23.62″)
Weight		46 Kg (101.41 lbs)