Aprašymas

Features	Applications
High power 132 dB continuous, 138 dB peak Fitted with integral handles Line array emission wavefront DSP onboard with dedicated presets Ultra fast setup and dismantling system Analog and digital AES-EBU inputs	Theatrical sound reinforcement Concert halls AV Systems Cinema and special effects

All the systems feature two channels of class D amplification, housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KP102		Acoustics
Power handling		720 W
Impedence		4 Ohm – 16 Ohm (Selectable)
Frequency range		100 Hz – 20 KHz.
Maximum SPL		128 dB continuous – 134 dB peak

		Coverage
Horizontal		90 °
Vertical		7° – 30° (Selectable)

		Crossover
Type		External Crossover required
Frequency		High pass @100 Hz, 24 dB/oct suggested minimum

		Transducers
Full-range		12 x 3.15″ Neodymium magnet with 1″ voice coil

		Audio Input
Connectors		2 x 4-pin Speakon
Wiring		1+1- (signal IN & LINK); 2+2- (through)

		Selection Switch
Vertical pattern		Spot – Flood
Impedence		4 Ohm – 16 Ohm (Selectable)

		Physical
Dimensions		8.8 x 100 x 11.8 cm (3.56″ x 39.4″ x 4.65″)
Weight		12 Kg (28.45 lbs)

KMT21		Acoustics
Power handling		1800 W
Frequency range		30 Hz – 150 Hz. +/- 3dB (preset dependent)
Maximum SPL		132 dB continuous – 138 dB peak

		Coverage
Horizontal		Omni
Vertical		Omni

		Crossover
Type		DSP controlled
Frequency		150 Hz minimum (preset dependent)

		Transducers
Full-range		1 x 21″ Neodymium speakers with 4″ voice coil

		Amplifier
Type		1 module class D – DSP controlled
Power		2 x 2400 Watt @ 4 Ohm
Protection		Dynamic limiter, over current, over temp and short circuits

		Physical
Dimensions		55.5 x 55.5 x 77.7 cm (21.85″ x 21.85″ x 30.59″)
Weight		49 Kg (108.03 lbs)